15 ton European-spec Single Girder Gantry Crane for sale to Australia

  • 5 Replies

tai tai

  • ***
  • 1623
  • +0/-0
  • Ludo King
We have completed 1 single girder gantry crane installation project in Australia, which is a 15 ton European-spec Single Girder Gantry Crane, model MHO, from Qingdao, China to Sydney, Australia. The main beam of the gantry crane is a Welded box-section beam, mainly uses material Q235B carbon structural steel strong and elegant, easy to maintain, Three-layer painting, and the hoisting equipment adopts a low headroom hoist. The performance of the low headroom hoist is: Inverter traveling speed and lifting speed, Reducer, drum, motors, Insultation grade, F Protection class IP54.

European-spec Single Girder Gantry Crane Parameters
Lifting capacity: 15T
Lifting height: 7M
Span: 20M
Power supply: 415v 3phase 50hz
Pendant control and remote control
Working class: FEM2M (ISO M5)
Technical Specifications
Lifting capacity   t   15
Lifting height   m   7
Span   20
Speed   Cross traveling speed   m/min   2.0~20 (inverter control)
Crane traveling speed   2.0~20 (inverter control)
Lifting speed   0.7~4.0 (inverter control)
Working class     /   FEM2M (ISO M5)
Power supply     V/Hz/P   415V/50HZ/3P
Crane traveling power   KW   2.2*2
Trolley traveling power   1.1*2
Lifting power   13
Total power   19.6
Max. wheel load   KN   133.8
Total weight   t   17.7
Ambient temperature   /   -20℃ ~ +40℃
Anti-collision system   /   Included
Phase protection relays   /   Included
Limit switch   /   Included
Voltage Low Protect device   /   Included
Emergency stop action   /   Included
Ground fault protection   /   Included
Short-circuit protection   /   Included
Over-heating protection   /   Included
Power-off protection   /   Included
Over-current protection   /   Included
Overload protector   /   Included
Top Quality Buffer   /   Included
Country of Origin      China
Recommended Rail Specification

Type   Top Width(mm)   Bottom Width(mm)   Height(mm)   Weight(kg/m)
P38   68   114   134   38.73
European-spec Single Girder Gantry Crane Finished Installation
Lifting hoist & Electrics
Lifting hoist & Electrics

15 ton European-spec Single Girder Gantry Crane

(The above picture is for reference to crane model only)

In addition to the advantages of ordinary single-beam cranes, European-style single-girder cranes adopt low-headroom design in design concept, which can effectively increase the transportation space, and the unique C-shaped structure increases the hoisting space accordingly. In terms of appearance, it is European-style design, light in weight, and can be programmed to lift the limit to achieve comprehensive protection. In terms of performance, it has stable startup and operation, no impact, good mute effect, and reduced noise pollution; and low failure rate, which can reduce maintenance costs and prolong service life. In the system composition, there is a hard tooth surface reducer, which has high bearing capacity and long service life; semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free; and a three-in-one drive of motor, brake and reduction box

Gantry Crane Processing
Gantry Crane Processing

Package and Delivery
Gantry crane Package and Delivery

Product Certifications
Our products have passed CE (ECM) and ISO Certifications, and you can also specify a third-party agency for quality testing. Fees of third-party testing are not included in this offer.

ISO CertificationsCE (ECM) Certifications

Technical Standards
Design and Construction Rules

All required standards for cranes are the FEM standard, DIN standard and Chinese National standard.

Europe Main National Standards

— 89/392/EEC standard (93/68/EEC)

— 91/368/EEC standard

— 73/23/CEE standard

— “EMC” standard 89/336/EEC

— EN 60204-1

— EN 292 mechanical safety

— ISO 2141

— ISO 2766

International Standards

— June 9, 1993 / Sept. 22, 1993 notice

— July 29, 1992, 92-765, 92-766, 92-767 notice

— DIN 5684

— DIN 15400; DIN 15401

— NFE 26-010

— NFE 26-030

Technical Standards

— FEM 9.511    Mechanical group

— FEM 9.661    Hoisting and traveling components size and quality standard

— FEM 9.671    Wire rope quality standard

— FEM 9.681    Travel motor choice

— FEM 9.682    Hoisting motor choice

— FEM 9.755    Electric hoisting equipment

— FEM 9.811    Electric crane standard

— FEM 9.901    Hoisting components design reference

— IEC 34-1      Traveling and allocation performance

— IEC 34-5      Protection grade standard

— IEC 947-5-1   Low voltage equipment

China Main National Standards

Design rules for cranes GB/T 3811-2008

Safety rules for lifting appliances GB 6067-2010

Common crane technical condition GB 7592-87

Crane-Overhead travelling crane and portal bridge crane

tolerances for manufacture and tracks laying GB/T 10183-2010

Crane-test code and procedures GB/T 5905-2011

General Bridge crane GB/T 14405-2011

Portal Crane GB/T 14406-2011

Crane & Lift Equipment Technical Performance and Acceptance Condition GB/T 17908-1999

Electrical installation and acceptation standard GBJ 232-82

Safety of Machinery – Electrical Equipment of Machines

Part 32: Requirements for hoisting machines GB 5226.2-2002

Electrical installation and acceptance standard GB 50256-96

15 ton European-spec Single Girder Gantry Crane for sale to Australia



  • ***
  • 61489
  • +1/-1
  • Ludo King
Re: 15 ton European-spec Single Girder Gantry Crane for sale to Australia
« Reply #2 on: October 16, 2022, 05:01:55 AM »