The wire rope hoist is a light lifting equipment that can be directly used in factories and warehouses and other places, and can also be installed on different crane steel beams to lift items. Today we share an order for wire rope hoists from a Pakistani textile factory. Customers need to customize several sets of 5 ton wire rope hoists for material handling.

Main parameters of Pakistan wire rope hoist
Type: CD Electric Wire Rope Hoist
Lifting Capacity: 5 ton
Lifting Height: 8m
Lifting Speed: 8m/min
Travelling Speed: 20m/min
Voltage: 220V, 50Hz, 3Phase
Working Class: M4
Ambient Temperature: -25~40℃
Application of wire rope hoist in Pakistan
Extensively used in factories, workshops, warehouses and many other occasions to hoist materials directly.
Installed on the straight or curve I-steel beam of Single-girder Cranes to lift goods.
Electric hoist for sale can also be used together with electric hoist double-beam, gantry crane and slewing cranes to hoist different items and so on.
Design of various parts of wire rope hoist
Wire rope electric hoist is assembled by several parts: hoisting gear box, hoisting motor with brake, rope drum, electric control panel and traveling trolley. All these units are separately assembled and can be promptly disassembled.

Motor: Hoist motor is a taper type rotor motor with braking, has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear box: Hoist gear box has specially treated gears for high wear resistance. Each geared shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope drum: Grooved hoist drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum shaft resolves on ball bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
Rope guide: rope guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of Dongqi is thickened and dilated, so that it is not easy to be damaged.
Hook: Hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Wire rope hoist design drawing

How to customize wire rope hoist
We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a wire rope hoist, you can leave a message on the website or email, tell us the following information, and our sales manager will contact you:

The Lifting capacity, lifting height;
The voltage or power supply (single phase or 3-phase hoist);
The suspension (hook, geared trolley, motorized trolley);
The control types;
The duty cycle, hoist speed, trolley speed, and beam size;
The application, what materials to be lifted.
https://www.chainhoist.top/pakistan-textile-factory-customized-5-tons-wire-rope-hoist.html