HD overhead crane procurement parameters
Order time: 2021.9.24
Lifting capacity: 3 ton
Lifting height: 7 m
Span: 11.75 m
Working voltage: 400v/50hz/3p
Order content: HD 3 ton overhead crane + 1 ton electric chain hoist
Exporting country: Morocco
This is the order of overhead crane and electric hoist sold to Morocco in 2021. The customer purchased a set of HD 3 ton overhead crane and a set of 1 ton electric chain hoist from our crane factory, of which all the motors of HD overhead crane use SEW motors. The order was placed in the factory on September 27, the production drawings were confirmed on September 28, the chain hoist was placed in the factory on October 12, and all production tasks of HD crane were completed on November 22. Then we sent the test video to the customer. After receiving the balance payment from the customer, we sent the order to Morocco on January 15, 2022. The atlas shows the picture of the order in the production process of the factory. If you want to know more about the overhead crane and electric chain hoist, or want to know the latest price of 3 tons of overhead crane and 1 ton of electric chain hoist, please contact us.

HD Overhead Crane Introduction
HD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.

The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reducer (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.

HD electric single-girder crane is suitable for working in the environment conditions of working level A3～A5, working environment temperature -25℃～+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.

HD 3-ton overhead crane and electric chain hoist sold to Morocco in 2021