Certex Danmark A/S has delivered and installed two new tailor-made crane solutions for Vredo Denmark’s newly built workshop halls in Aulum, near Herning.

10 ton overhead crane
10 ton overhead crane

Vredo Danmark is a distributor of agricultural machinery that required the two crane solutions for very different lifting and handling tasks.

One crane is a Certex-GH 10 ton overhead crane for the preparation hall, and the other is a Certex-Niko light rail crane for the welding department.

The workshop’s largest and heaviest items are handled in the preparation hall. The single overhead crane here has a span of over 18m and a lifting height of 6.2m. It has an underrunning girder and comes with frequency control of all movements, a load display and radio control.

In the welding department, the crane is designed to handle smaller items that weigh 15kg to 100kg, although there is occasionally a need to lift larger items of up to 1,000kg. In order to accommodate both types of lifting and at the same time achieve the highest possible efficiency, Certex Danmark installed a light rail crane that is constructed with two traverses, each with a capacity of 500kg, for a total capacity of 1,000kg

The Certex-Niko light rail crane is equipped with a Liftket variable frequency drive (VFD) electric chain hoist and is operated via a radio-controlled remote control.

“Originally, a 1,500kg overhead crane was wanted in the welding hall, but based on good dialogue and guidance from Certex Danmark, the choice instead fell on a light rail with two overhead cranes, which is faster and easier to operate and at the same time enables both types of lifting,” said Lars Vestergård, director and owner at Vredo Danmark.

Certex Danmark is a lifting equipment specialist. It is part of the Certex Group, which operates internationally.

Certex installs customised cranes for Danish agricultural machinery company

To the lady asking about Prototyp Kunststoff, Spritzguss mit magnetischer Platte, Spritzgussformtexturierungsprozess, Komponenten einer Spritzgussmaschine, Spritzgussformheizung, Angusskanal im Spritzguss, Plastikspritzgussdüse, Heißkanaldüsenheizung, 3D-gedruckte Spritzgussform, Spritzgusskosten pro Einheit,  I highly suggest this click here for spritzguss online details or IC-Formverfahren, Guss von Kunststoffteilen, Spritzgusskolben, Design von Spritzgusswerkzeugen, Dünnwand-Spritzgussmaschine, Kern im Spritzguss, Kaltkanal und Heißkanal, Mikroeinlegeformung, Angusskanalspritzguss, Großteil-Kunststoffspritzguss, not forgetting sites such as this high rated prototypen spritzguss advice alongside all Isolierte Angussform, ABS-Kunststoff-Spritzgussform, Spritzguss mit Klemmkraft, Spritzguss mit magnetischer Platte, Spritzgussform aus Kunststoff, Kleinteilformung, 3-Platten-Spritzgussform, Spritzgussverteiler, Spritzgusskomponenten, Spritzguss mit Auswerferstange, not to mention this recommended site about 3d druck großformat blog which is also great. Also, have a look at this killer deal about spritzgussform herstellen lassen forum bearing in mind Felgenspritzguss, EVA-Formverfahren, Spritzguss mit externer Gasunterstützung, Mikro-MIM-Verfahren, Mikro-Spritzgussform, Komponenten einer Spritzgussmaschine, Zwei-Schuss-Spritzgussprozess, Kunststoffformmaterial, Spritzguss mit Metalleinsätzen, Plastikformwerkzeuge, on top of this great spritzgussform herstellen lassen tips not to mention 3D-gedrucktes Formen, Spritzgussmaschine 100 Tonnen, Spritzguss-Angussdesign, Spritzguss mit Schneckengeschwindigkeit, Gewindeeinsätze für Kunststoff Spritzguss,  our website about on top of IBM-Spritzgussmaschine, Kosten für Kunststoffformwerkzeuge, Spritzguss von Hohlteilen, Spritzguss in kleinen Auflagen, Formteile-Spezialisten,  for good measure. Check more @ High Rated Google Indexing Info bbef504