25 ton overhead crane suitable use in middle and light working conditions.

Lifting speed can be with normal speed and slow speed, when work for presision lifting, it should choose the slow speed.

25 ton overhead crane standard specification:

Lift capacity: 25 ton and below
Lift height: 6 – 30m
Span: 7.5m – 35m
Work duty: M3 – M5
Operate type: Cabin control, remote control, pendent switch control
Power: 380V/50HZ/3P or based on the requires
Lift speed: 0-8m/min, single speed, double speed or frequency control speed
Traverse speed: 20 m/min
Travel speed: 20,30m/min or frequency control speed
About 25 ton Overhead Crane Specifications
As a material handling equipment, the 25-ton bridge crane can be used for material lifting and transportation in many different industries. The crane uses reliable motors and accessories to ensure high-quality and safe work. Dongqi Crane is a professional crane manufacturer in China with 30 years of experience in the production of bridge cranes. The 25 ton bridge crane we provide can adopt single beam or double beam according to the customer’s working situation, and can be used for lifting or lowering configuration. All these cranes can be customized according to special requirements.

Comparison Table of 25 ton Overhead Crane
Overhead Bridge crane   Capacity   Span   Height   Coverage Area Type   Coverage Area   Motorization
Single Girder Overhead Crane   25 ton   7.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Double Girder Electric Hoist Crane   25 ton   7.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Double Girder Overhead Crane   25 ton   7.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Low Headroom Single Girder Overhead Crane   25 ton   7.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
European Single Girder Overhead Crane   25 ton   6m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
European Double Girder Overhead Crane   25 ton   6m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Explosion-proof Double Girder Overhead Crane   25 ton   7.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Grab Bucket Overhead Crane   25 ton   10.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Electromagnetic Overhead Crane   25 ton   10.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Insulation Overhead Crane   25 ton   10.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Double Trolley Overhead Crane   25 ton   10.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
Ladle Crane   25 ton   10.5m ~ 31.5m   customize   Square/Rectangle   31.5m x Unlimited Length   Yes
The selection of specifications for single beam cranes is usually based on the actual weight and span of the required load. Here are some key points for selecting the specifications of a single beam crane:

Span: The span of a single beam crane refers to the distance between the main beam of the crane and the track, usually measured in meters. When selecting the specifications of a single beam crane, it is necessary to consider the span. The larger the span, it is necessary to choose a larger crane to withstand greater weight.
Load weight: The load weight of a single beam crane refers to the maximum weight that the crane can lift. When selecting the specifications of a single beam crane, it is necessary to select the appropriate crane based on the actual required load weight.
Working level: The working level of a single beam crane refers to the load that the crane can withstand under different working conditions. The higher the working level, the higher the Factor of safety of the crane, but also the higher the price. Therefore, when selecting the specifications of a single beam crane, it is necessary to choose the appropriate crane based on the actual required working level.
Special requirements: According to actual needs, it may be necessary to choose a single beam crane with special functions, such as explosion-proof, anti-corrosion, dustproof, etc. When selecting the specifications of a single beam crane, it is necessary to choose a suitable crane based on special requirements.
Single Girder Crane Specifications
1 Ton Single Girder Crane Specifications 2 Ton Single Girder Crane Specifications 3 Ton Single Girder Crane Specifications 25 ton Overhead Crane Specifications 30 ton Overhead Crane Specifications 100 ton Overhead Crane Specifications
How to customize Overhead Crane from China
We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or Email: [email protected], tell us the following information, and our sales manager will contact you:

25 ton Overhead Crane Specifications