LD type 3 ton overhead crane procurement parameters
Order time: 2021.10.28
Lifting capacity: 3 ton
Lifting height: 10 meters
Span: 15 meters
Working voltage: 380v/60hz/3p
Order content: LD type 3 ton overhead crane
Exporting country: Tanzania
This is the order of overhead crane sold to Tanzania in 2021. The customer purchased a set of LD type 3 ton overhead crane (without main beam) from our crane factory, and matched with CD type 3 ton electric wire rope hoist. The order was placed from the factory on October 29, and all components of the overhead crane were packed on December 26. After receiving the balance payment from the customer, the product will be sent to Tanzania on February 18, 2022. The atlas shows some details of the components of the overhead crane in the factory. If you want to know more about the overhead crane and the latest price of the 3t overhead crane, please contact us.

Brief Introduction of LD Electric Single Girder Bridge Crane
LD electric single-girder bridge crane is a lifting machine with simple structure and wide application. The whole machine is used together with CD₁ and MD₁ electric hoists. There are ground (wired and wireless) and control room control modes for the crane, which can be selected by users.

Parameter
Lifting capacity: 1, 2, 3, 5, 10, 16, 20, 25, 32 tons (can be customized according to actual requirements)
Span: 7.5m-34.5m (can be customized according to actual requirements)
Lifting height: can be customized according to actual requirements
The working level is A3～A5
Working environment temperature -25°C～40°C
Use
It is mostly used in machinery manufacturing, assembly workshops and warehouses. If it is equipped with a motor grab as a spreader, it can load, unload and carry bulk items. It is not suitable to work in the environment with explosion hazard and fire hazard, nor in the place with high humidity or full of acid and alkali gas, nor can it be used to transport molten metal, toxic materials and flammable and explosive materials.

Structural advantages
The main girder of this machine is a box-shaped and I-shaped steel welded structure, which has the advantages of beautiful appearance and small size on the basis of ensuring strength, rigidity and stability. The main and end beams are connected by a split structure, which is convenient for transportation and installation. This product has two manipulation forms: ground and control room. There are two types of control room: open type and closed type, and the entry direction has two types: side and end, for users to choose according to different requirements.

LD 3-ton overhead crane and electric wire rope hoist sold to Tanzania in 2021