Dongqi crane provided 13 sets of QD-type double-girder
bridge cranes for a large profile factory, with specifications divided into QD50t, QD32t/10t, QD20/5t, QD10t, and QD5t. As a professional crane supplier, Dongqi Crane can provide customers with technical consultation, drawing design, and product manufacturing.
The QD general-purpose bridge crane relies on the longitudinal movement along the direction of the support track on the driving beam of the factory building, the lateral movement of the trolley and the lifting and lowering of the hook to realize the work process. The common lifting capacity is 5-200t, the working level is A5-A6, and the control methods include ground control, control room control and remote control for users to choose. Level A5 is suitable for general machining and assembly workshops, metal structure workshops, mechanical maintenance workshops, etc. where the work is not very heavy; Level A6 is suitable for occasions where the work is more frequent or where continuous production or continuous transportation is required.
QD type general purpose bridge cranes
QD type general purpose bridge cranes
QD type general purpose bridge cranes
QD type general purpose bridge cranes
QD type general purpose bridge cranes
QD type 50t bridge crane parameters
1、 Basic parameters
Rated lifting capacity: 50 tons
Span: 28 meters (adjustable according to the actual size of the workshop)
Lifting height: 18 meters (adjustable according to process requirements)
Work level: A6 (Heavy duty work system)
2、 Structural parameters
Main beam type: Double beam box structure, with high strength and stability
Main beam material: Q345B or higher strength low alloy structural steel
End beam structure: box shaped structure used to support the main beam and connect the crane operating mechanism
Small frame: sturdy small frame design, carrying lifting mechanism and electrical equipment
3、 Lifting mechanism parameters
Lifting speed: Multiple speed options are available, such as the main lifting speed of 5-7 meters/minute and the slow speed of 0.5-1 meters/minute
Motor type: specialized for lifting, suitable for heavy loads and frequent starting needs
Brake type: Normally closed electromagnetic brake, ensuring safe stopping of lifting motion
Wire rope specifications: Choose the appropriate wire rope specifications based on the lifting capacity and working environment
4、 Parameters of the crane operating mechanism
Crane running speed: 45 meters/minute (adjustable according to actual needs)
Motor type: Crane specific motor, providing stable and reliable power
Wheel material and diameter: Cast steel wheels, surface hardening treatment to improve wear resistance; The diameter is determined based on the bearing capacity and wheel pressure
Track model: QU series crane dedicated track that matches the workshop track
5、 Electrical system parameters
Control voltage: 380V/50Hz (adjustable according to local power grid standards)
Control system: PLC programmable control, achieving precise control and protection functions of cranes
Protective devices: including overload protection, phase loss protection, short circuit protection, etc., to ensure the safe and reliable operation of the electrical system
Cable drum: Automatically retract and release cables to avoid damage and safety hazards caused by cable dragging on the ground
6、 Safety facility parameters
Buffer: Set buffers at both ends of the crane to absorb impact energy and protect the crane structure from damage
Windproof facilities: equipped with rail clamps, anchoring devices and other windproof equipment to ensure the stability of the crane in high wind speeds
Limiting device: Limiting devices are installed for lifting, large and small vehicle operation to prevent safety accidents caused by over travel operation
Emergency stop button: Emergency stop buttons are installed in the crane operation room and key locations to quickly cut off power and stop the crane operation in case of emergency.
Dongqi Crane Provides Multiple QD Type Bridge Cranes To The Profile Factory