1. Double Girder EOT Crane Power supply system:
Power supply: 220V - 660V, three phase current, three-wire
Driving power supply: 220V - 660V,
Control power supply: 24 VAC, 36 VAC, 220VAC
Safety lighting power supply: 24 VAC, 36 VAC
Maintenance Power Supply: 220V - 660V
2. Double Girder EOT Crane Electrical control system
Main electrical components use Schneider.
Emergency stop: Emergency stop button is arranged on the operating table and the general control panel of the electric room, when the operator has accident or the equipment failure, press the emergency stop button, the whole crane driving power and control power are cut off.
Driver’s cabin using linkage control with zero self-locking, the linkage table must have clear power indicator and work indicator.
Setting overload limiter, when lifting loads reach 90% of rated lifting capacity, alarming; reaching 105%, hoisting is prohibited.
Control cabinet (panel) should have steady mounting base, to prevent vibration; control cabinet (panel) using front wiring; PVC wiring duct should be smooth, no glitches, and ground insulation skin, wire cable must be protected by the wire duct exit.
3. Double Girder EOT Crane Lighting system
Driver’s Cabin lighting: 20W fluorescent light
Under the main beam lighting: 2 halogen lamps
Overhaul socket: set 220V - 660V, 36V socket in the following parts: Driver’s Cabin 220V - 660V, 36V 2pcs;
Main beam 220V - 660V, 36V 3pcs
4. Double Girder EOT Crane Other parts
Ensure maintenance space
Cross traveling cable select pull resistant flexible cable, located terminal box at both ends of the cable; terminal box adopt bakelite board mounted brass screws as terminals.
Wire cable laying on bridge frame, power, control, lighting and auxiliary circuits are all independent.
All double girder EOT crane using driver’s cabin and wireless remote control, single girder crane using ground pedant and wireless remote control, remote adopt Taiwan U-ting push button type.

Double Girder EOT Crane Specification
5 Ton Double Girder EOT Crane Use Environment 10 Ton Double Girder EOT Crane Use Environment 5 Ton Double Girder EOT Crane Specification Configuration 10 Ton Double Girder EOT Crane Specification Configuration 5 Ton Double Girder EOT Crane Design Specification 10 Ton Double Girder EOT Crane Design Specification 100 Ton Double Girder EOT Crane Design Specification Double Girder EOT Crane Specification Design – Mechanical Parts Double Girder EOT Crane Specification Design – Electrical Parts Double Girder EOT Crane Specification Design – Use Environment
How to customize Double Girder EOT Crane from China
We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Double Girder EOT Crane, you can leave a message on the website or Email: [email protected], tell us the following information, and our sales manager will contact you:

Lifting capacity (ton): __ ?( The rated capacity)
Lifting height (m):__ ? (Height from hook center to the floor)
Span (m): __ ? (Distance between rail center)
Lifting speed (m/min): __ ? ( Single, Dual, Variable)
Traveling distance (m): __ ? (The length of the rail)
Work duty: __ ? (How many hours a day? How many times an hour?)
What material to be lifted: __ ?
Industrial voltage: __ ? ( like :380V, 50Hz, 3ph )
Double Girder EOT Crane Specification Design - Electrical Parts