We have completed 1 single girder gantry crane installation project in Australia, which is a 15 ton European-spec Single Girder Gantry Crane, model MHO, from Qingdao, China to Sydney, Australia. The main beam of the gantry crane is a Welded box-section beam, mainly uses material Q235B carbon structural steel strong and elegant, easy to maintain, Three-layer painting, and the hoisting equipment adopts a low headroom hoist. The performance of the low headroom hoist is: Inverter traveling speed and lifting speed, Reducer, drum, motors, Insultation grade, F Protection class IP54.

European-spec Single Girder Gantry Crane Parameters
Lifting capacity: 15T
Lifting height: 7M
Span: 20M
Power supply: 415v 3phase 50hz
Pendant control and remote control
Working class: FEM2M (ISO M5)
Technical Specifications
Lifting capacity   t   15
Lifting height   m   7
Span   20
Speed   Cross traveling speed   m/min   2.0~20 (inverter control)
Crane traveling speed   2.0~20 (inverter control)
Lifting speed   0.7~4.0 (inverter control)
Working class     /   FEM2M (ISO M5)
Power supply     V/Hz/P   415V/50HZ/3P
Crane traveling power   KW   2.2*2
Trolley traveling power   1.1*2
Lifting power   13
Total power   19.6
Max. wheel load   KN   133.8
Total weight   t   17.7
Ambient temperature   /   -20℃ ~ +40℃
Anti-collision system   /   Included
Phase protection relays   /   Included
Limit switch   /   Included
Voltage Low Protect device   /   Included
Emergency stop action   /   Included
Ground fault protection   /   Included
Short-circuit protection   /   Included
Over-heating protection   /   Included
Power-off protection   /   Included
Over-current protection   /   Included
Overload protector   /   Included
Top Quality Buffer   /   Included
Country of Origin      China
Recommended Rail Specification

Type   Top Width(mm)   Bottom Width(mm)   Height(mm)   Weight(kg/m)
P38   68   114   134   38.73
European-spec Single Girder Gantry Crane Finished Installation
Lifting hoist & Electrics
Lifting hoist & Electrics

15 ton European-spec Single Girder Gantry Crane

(The above picture is for reference to crane model only)

In addition to the advantages of ordinary single-beam cranes, European-style single-girder cranes adopt low-headroom design in design concept, which can effectively increase the transportation space, and the unique C-shaped structure increases the hoisting space accordingly. In terms of appearance, it is European-style design, light in weight, and can be programmed to lift the limit to achieve comprehensive protection. In terms of performance, it has stable startup and operation, no impact, good mute effect, and reduced noise pollution; and low failure rate, which can reduce maintenance costs and prolong service life. In the system composition, there is a hard tooth surface reducer, which has high bearing capacity and long service life; semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free; and a three-in-one drive of motor, brake and reduction box

15 ton European-spec Single Girder Gantry Crane for sale to Australia